SOURCESQUID®
EN
Free teardown
Quality · Uttar Pradesh

Factory audit in Noida.

SourceSquid audits electronics, garments, and plastic and rubber parts suppliers in Noida – Greater Noida, Uttar Pradesh: one day on site for USD 298, with a scored report, photos and an action plan. Noida is a major national manufacturing cluster, also known for mobile phones and electronics assembly. Our auditor adds the electronics and PCBA questions to the seven areas every audit scores.

3
process modules for this cluster
USD 298
per 1-day audit
Included
travel within Noida
Factory audit · Noida28.54° N, 77.39° E
Map of Noida – Greater Noida in Uttar Pradesh, with nearby clusters, the nearest seaport and inland container depot DelhiGujaratHaryanaMadhya PradeshPunjabRajasthanUttar PradeshUttarakhand FaridabadGurugram – ManesarPanipatDelhi – OkhlaMoradabadAligarhAgraFirozabadJaipur – Sanganer – BagruRewari – Dharuhera – BawalRohtakMeerutSaharanpurKhurjaNeemrana – BhiwadiPilkhuwa Noida – Greater Noida
  • Noida
  • Nearby clusters
  • Seaport
  • Inland depot (ICD)
From Bengaluru
1,730 km
Nearest seaport
Deendayal · 940 km
Fixed price · book online

Noida is one of our main clusters, so travel is included. You see the exact total before you confirm. Audit day: opening meeting, floor walk, record review, worker interviews and a closing meeting; the scored report follows with a review call.

Process focus

What our auditor asks in Noida.

On top of the seven areas, the questions for the processes Noida runs: electronics & assembly, garments & cut-make-trim and plastics & rubber moulding. Answers are checked against records and the floor.

Electronics & assembly

Electronics and PCBA

  • Is the assembly area ESD-protected to IEC 61340-5-1 or ANSI/ESD S20.20 (grounded workstations, daily wrist-strap checks, humidity control)?
  • Which workmanship standard do you build to?
  • What inspection and test coverage do you have?
Garments & cut-make-trim

Textiles and garments

  • Is incoming fabric inspected on the 4-point system (ASTM D5430) or equivalent, with shrinkage and shade tests before cutting?
  • Are shade lots controlled (customer-approved shade bands, no mixing of lots within a garment or order)?
  • How is the approved sample controlled on the floor?
Plastics & rubber moulding

Injection moulding and plastics

  • How is resin dried?
  • Is regrind controlled: a maximum percentage agreed with the customer, recorded, and none used where the customer prohibits it?
  • Do you receive a certificate of analysis for every resin lot and keep lot traceability to moulded parts?
Floor walk

The line, step by step.

Our auditor walks the whole process. For Noida's products, these are the steps on that walk.

Injection-moulded plastic parts with textures6 steps
  1. DFM & mould flow · Wall thickness, draft and gate review
  2. Tool build · P20/H13 steel mould built in-house or by a tool room
  3. Texture · Mold-Tech or VDI texture applied to the cavity
  4. T0/T1 trials · Parts moulded, measured and adjusted
  5. CMF approval · Colour, gloss and texture signed off against master
  6. Production & PPAP · Process locked, capability study, first shipment
Full guide to injection-moulded plastic parts with textures →
Electronics & PCB assemblies6 steps
  1. DFM & BOM check · Component availability and alternates
  2. SMT · Paste print, pick-and-place, reflow
  3. THT & wave · Through-hole parts and selective soldering
  4. AOI & X-ray · Automated optical and BGA inspection
  5. Functional test · Test jig built to your procedure
  6. Conformal coat & box build · Coating, enclosure and final pack
Full guide to electronics & PCB assemblies →
Capacity

Volumes and lead times to check against.

The audit compares real output per line and per shift with what you plan to order. These are the usual starting points for Noida's processes and products.

Electronics & assemblyTypical minimum order
Often 500–1,000 boards per SMT run; prototypes of 10–50 boards are possible at a higher unit cost.
Garments & cut-make-trimTypical minimum order
Typically 300–1,000 pieces per style; some sampling units in Delhi and Mumbai start lower.
Plastics & rubber mouldingTypical minimum order
Usually 1,000–5,000 pieces per part after tooling; rubber parts from a few thousand pieces.
Injection-moulded plastic parts with texturesTypical lead time
Tooling and T1 samples 5–8 weeks, production 3–5 weeks
Electronics & PCB assembliesTypical lead time
Prototypes 3–5 weeks, production 6–10 weeks depending on components
Plastic pallets & returnable packagingTypical lead time
Standard designs 2–4 weeks; new tooling 10–14 weeks plus production
Knitwear & T-shirtsTypical lead time
Samples 2–3 weeks, production 5–8 weeks
Made here

Noida, in the Atlas.

Uttar Pradesh has India's widest craft-manufacturing base: brass in Moradabad, locks in Aligarh, glass in Firozabad, carpets in Bhadohi, leather in Kanpur and Agra, and sports goods in Meerut, plus electronics in Noida. The Noida cluster guide has the full record.

Known for
Mobile phoneselectronics assemblygarments
Materials worked
Engineering plastics (ABS, PC, nylon)ABS · PC · PC/ABSPolypropylene and polyethylenePP homopolymer · PP copolymer · HDPE
Also made in
Injection-moulded plastic parts with texturesSilvassa · Pune · ChennaiElectronics & PCB assembliesBengaluru · Chennai · HosurPlastic pallets & returnable packagingSilvassa · Pune · Chennai
Factory calendar

Dates that slow Noida factories.

  1. 15 Nov 2026Chhath PujaRegional: Uttar Pradesh
  2. 23 Mar 2027HoliRegional: Uttar Pradesh
  3. 17 Aug 2027Raksha BandhanRegional: Uttar Pradesh
  4. 29 Oct 2027DiwaliFactories across India slow down or close

Audit days are best booked clear of them, when the full shift is on the floor. Full year: holiday planner.

Practical

Ports, travel and languages.

Noida is one of our main clusters, so travel is included. Distances are straight-line from the city centre.

Travel
Included: Noida is one of our main clusters1,730 km from our Bengaluru office, straight line
Languages
Hindi and UrduOur team speaks Hindi
Nearest seaport
Deendayal (Kandla), 940 kmGandhidham, Gujarat
Nearest ICD
ICD Tughlakabad, in the cityInland container depot for customs clearance and rail to port
Audit in Noida

Straight answers.

Anything else, ask us directly. A principal replies, not a bot.

[email protected]

What do you check at a Noida electronics supplier?

The seven areas of every audit: quality system, capacity, machines and maintenance, inspection controls, traceability, and social, environment and safety basics. For electronics and PCBA, the auditor also asks: Is the assembly area ESD-protected to IEC 61340-5-1 or ANSI/ESD S20.20 (grounded workstations, daily wrist-strap checks, humidity control)?

What does a factory audit in Noida cost?

USD 298 per one-day audit, with the scored report, photos, action plan and a review call. Noida is one of our main clusters, so travel is included.

How long does injection-moulded plastic parts with textures take to make in Noida?

Tooling and T1 samples 5–8 weeks, production 3–5 weeks. The audit checks real output per line and shift against your plan.

Can you audit several factories around Noida in one trip?

Yes, a day per factory. Delhi (10 km), Faridabad (20 km), Pilkhuwa (30 km) and Gurugram (50 km) are within 250 km of Noida.

When is a bad time to audit in Noida?

Around Chhath Puja (15 Nov 2026), Holi (23 Mar 2027) and Raksha Bandhan (17 Aug 2027), when shifts in Uttar Pradesh run short.

Which languages will the auditor use in Noida?

Factory floors work in Hindi and Urdu. Our team speaks Hindi, so workers are interviewed directly. The report is in English.

Book an audit

Audit your Noida factory before the deposit.

Tell us the factory and the product.

Book an auditTalk to a principal

USD 298 per 1-day audit

Chat on WhatsApp+91 98406 98791